The 35th International Symposium of Chemical Engineering (ISChE2024)
Date: 2024. Nov. 29th, 30th, Dec. 1st
Venue:Okinawa Prefectural Municipal Autonomy Hall
Keynote:
K7 Analysis and optimal design of polymer electrolyte fuel cell catalyst ink
process
Yuki Saito, Magnus So, Takeru Yano, Syusaku Asano and Gen Inoue
Oral presentation:
A12 Correlation between dynamic deformation of electrode layer/separator under
fastening environment and battery performance
Kosei Nagashima, Takeru Yano, Syusaku Asano and Gen Inoue
A14 Analyzing impact of operating condition on polymer electrolyte fuel cell
performance by simulation
Keita Nakano, Yuki Saito, Agnesia Permatasari, Takeru Yano, Syusaku Asano and Gen Inoue
Mr. Saito gave a speech as a Japan-side student representative.
Photos
(Left: Our group, Center: Mr. Saito received a certificate of Keynote Lecture, Right: Japan-side student representative speech at conference dinner)
Assistant Professor Yano lectured at joint symposium of National Taipei University of Technology (Taipei Tech) and Kyushu University.
Six young researchers, from the faculty of Engineering at Kyushu University, visited Taipei Tech to present their research and deepen exchanges through lab tours.
Date: November 20-22, 2024
Place: National Taipei University of Technology, Taipei
11 presentations and 3 co-authored presentations were given by our group at ECS PRiME 2024 in Honolulu, US.
Date: Oct. 6-11, 2024
Venue: Hawaii Convention Center & Hilton Hawaiian Village
Oral session:
A08-1082 – A Chemo-Mechanical Particle Model for the Fabrication and Cyclic Expansion of Silicon Composite Solid-State Batteries
〇Magnus So, Takeru Yano, Agnesia Permatasari, Van Lap Nguyen, *Gen Inoue
A08-1250 – Effect of Size Distribution of Solid Electrolyte on Tortuosity of Ionic Conductivity
〇Takeru Yano, Moritz Hofer, Shuji Ohsaki, Hideya Nakamura, Satoru Watano, Gen Inoue, Peter Michalowski, Arno Kwade
I01D-2977 – Investigation of the Influence of Catalyst Layer and Carbon Structure for Cell Performance Using Reaction and Mass Transport Simulation of PEFC
〇*Atsushi Yamamoto, Gen Inoue
I01F-3280 – Optimization of Cathode Catalyst Layer Composition of Polymer Electrolyte Fuel Cell for Maximum Cell Performance Using Machine Learning and Genetic Algorithm
〇Van Lap Nguyen, Agnesia Permatasari, Magnus So, Takeru Yano, *Gen Inoue
Poster session:
A07-0821 – Impact of Silicon Content on the Behavior of Graphite/Silicon Composite Anodes for High-Performance Lithium-Ion Batteries: Insights from Multi-Scale Simulations
〇Agnesia Permatasari, Magnus So, Van Lap Nguyen, Takeru Yano, *Gen Inoue
I01D-2993 – Evaluation of Degradation Mechanisms of Polymer Electrolyte Fuel Cell Using DEM Simulation
Kaisei Okamura, Yuki Saito, Magnus So, Agnesia Permatasari, Takeru Yano, 〇*Gen Inoue
I01D-2994 – Evaluation of Reaction and Mass Transport Properties of Fuel Cell Catalyst Layers
〇Ayako Kondo, Yuki Saito, Agnesia Permatasari, Keita Nakano, Takeru Yano, *Gen Inoue
I01E-3128 – Analysis of Two-Phase Flow within Porous Structures of Water Electrolysis Cells and Structural Correlation Evaluation
〇Shinnosuke Omoto, Takeru Yano, *Gen Inoue
Z01-4416 – Mechanism of Internal Crack Formation in All-Solid-State Batteries Due to Expansion and Shrinkage and Its Effects
〇Yuki Eto, Magnus So, Takeru Yano, *Gen Inoue
Z01-4437 – Reaction Transport Analysis and Parameter Identification for Designing Lithium–Sulfur Battery Electrodes
〇Minami Ihara, Yuki Mori, Takeru Yano, *Gen Inoue
Z01-4520 – Elucidation of the Effects of Particle Morphology on Stress and Reaction Fields in All-Solid-State Battery Electrode Structures and Structural Design
〇Koki Sato, Yuki Eto, Shinichiro Yano, Magnus So, Takeru Yano, *Gen Inoue
Co-authored presentations:
A05-0583 – Powder Structure Control Technology in the Solvent-Free Dry Electrode Forming Process of Lithium-Ion Battery and Its Battery Performance Evaluation
〇Feilure Tuerxun, *Ayaka Yonaga, Shigehiro Kawauchi, Takuro Matsunaga, Hiroshi Nakamura, Yuki Mori, Shota Ishikawa, Keita Nunoshita, Gen Inoue, Xuanchen Liu
I01D-2984 – Autonomous Exploration of Catalyst Layer Drying Process of PEMFC
〇* Keisuke Nagato, Hirotaka Oya, Akihisa Tanaka, Gen Inoue, Takuya Tsujiguchi
I01D-3028 – Design of Pillar-Structured Electrode of Polymer Electrolyte Fuel Cells by Experiment and Simulation of Reaction and Mass Transport
〇*Hideto Koshiba, Keisuke Nagato, Gen Inoue, Morio Tomizawa, Akihisa Tanaka, Masayuki Nakao
Photo
Dr. Yano recieved the Research Encouragement Award of Division of Systems, Information and Simulation Technologies at SCEJ 55th Autumn Meeting.
Date: 2024. Sep. 11-13
Venue: Sappro Campus, Hokkaido University
Oral Presentation:
(S203) *Yano Takeru, Moritz Hofer, Ohsaki Shuji, Nakamura Hideya, Watano Satoru, Inoue Gen, Peter Michalowski, Arno Kwade
“Numerical analysis of effect of particle size distribution on ionic conductive path in electrode for all solid state battery”
The graduation and certificate awarding ceremony in the first semester of 2024 was held on September 25, 2024,
One doctor’s student and one master’s student completed their studies.
8 members of our group gave presentations at the Society of Chemical Engineers, Japan (SCEJ) 55th Autumn Meeting.
Date: 2024. Sep. 11-13
Venue: Sappro Campus, Hokkaido University
Oral Presentation:
(S203) *Yano Takeru, Moritz Hofer, Ohsaki Shuji, Nakamura Hideya, Watano Satoru, Inoue Gen, Peter Michalowski, Arno Kwade
“Numerical analysis of effect of particle size distribution on ionic conductive path in electrode for all solid state battery”
Poster Presentation:
(YB249) *Kondo A., Saito Y., Permatasari A., Nakano K., Yano T., Inoue G.
“Prediction of cell characteristics of PEFC by machine learning”
(YB251) *Nagashima K., Yano T., Inoue G.
“Effect of Dynamic Behavior of Battery Internal Structure in Contracting Environment on Battery Performance and Evaluation”
(YB202) *Eto Y., So M., Yano T., Inoue G.
“Structural analysis in lithium-ion batteries considering viscoelasticity”
(YB226) *Sato K., Eto Y., So M., Yano T., Inoue G.
“Elucidation of the Effects of Particle Morphology on Battery Performance in All-Solid-State Battery Electrode Structures”
(YB228) *Ihara M., Yano T., Inoue G.
“Reaction Transport Analysis and Parameter Identification for Designing Lithium-Sulfur Battery Electrodes”
(YB248) *Nakano K., Saito Y., Permatasari A., Yano T., Inoue G.
“Evaluation of the effect of operating conditions using PEFC output characteristic simulation”
(YB250) *Okamura K., So M., Saito Y., Permatasari A., Yano T., Inoue G.
“Dynamic degradation analysis of polymer electrolyte fuel cell catalyst layers”
Photos
A paper co-authored by Professor Inoue has been published in International Journal of Hydrogen Energy.
Heterogeneous catalyst-layer model-based analysis of loss mechanisms in polymer electrolyte membrane fuel cells
International Journal of Hydrogen Energy, 86, 1140-1153 (2024)
https://doi.org/10.1016/j.ijhydene.2024.08.438
One master’s thesis was presented at the master’s thesis presentation meeting (Aug. 22)
Titles of graduation theses and master’s theses are listed on the “Members” page.
(M1) Mr. Omoto gave a poster presentation at Study Group on Phenomena Associated with Powder Handling in 2024
Study Group on Phenomena Associated with Powder Handling in 2024
Date: 2024. Aug. 1-3
Venue: Hotel Listel Hamanako
Sinnosuke Omoto : 異なる空隙率を有する水電解セル用多孔質電極の2相流解析 (P5)
Photo